• 1
GALVANIZED STEEL COIL
Number:
Up time:2022-06-06 11:33
Product description

Galvanized coil and galvanized sheet refers to dip steel sheet in a melted zinc tank to adhere a layer of zinc on its surface. It mainly uses the technology of continuous galvanizing process,which means put a roll of steel plate continuously into the melting zinc plating tank to make and alloy galvanized steel plate. This steel plate is also made by the technology of hot dip, which is heated to about 500℃immediately after the trough , so that it generates an alloy film of zinc and iron. This galvanized coil has good coating adhesion and weld-ability.

Zinc layer of the product is from Z20g to Z275g, thickness is 0.11-0.6mm, width is up to 1250MM


介紹插圖-英文.png


Galvanizing is a cost-effective method of rust prevention that is often used, and about half of zinc production is used in this process. Galvanized steel plate is used to prevent the surface corrosion of steel plate so that to prolong its service life. Coated with a layer of metal zinc on the surface of the steel plate is referred to as galvanized plate. 


According to the production and processing methods, it can be divided into the following categories:

1.Hot dip galvanized steel sheet. This kind of steel sheet is dipped into a melted zinc tank to adhere a layer of zinc on its surface. It mainly uses the technology of continuous galvanizing process,which means put a roll of steel plate continuously into the melting zinc plating tank to make galvanized steel plate.

2.Alloy galvanized steel sheet. This kind of steel sheet is also made by the technology of hot dip, but heated to about 500℃immediately after the trough , so that it generates an alloy film of zinc and iron. This kind of galvanized coil has good coating adhesion and weld-ability.

3.Galvanized steel sheet. This kind of galvanized steel sheet is made by electroplating and has good machinability. But the coating is thin so that the corrosion resistance is not as good as hot dip galvanized sheet;

4.Single-sided galvanized steel plate and double-sided difference galvanized steel plate. Single-sided galvanized steel plate refers to the product with only one side of galvanized. In welding, coating, rust treatment, processing and other aspects, it has better adaptability than double-sided galvanized sheet. In order to overcome the shortcomings of single galvanized sheet, another side of the galvanized sheet is also coated with a thin layer of zinc, that is, double-sided difference galvanized sheet;

Advantages of galvanized sheet: strong corrosion resistance. It can prevent the surface of steel plate from being corroded to prolong its service life. And galvanized sheet looks very clean, more beautiful, which increases its decorative effect. Its strong surface antioxidant capacity enhances rust resistance ability


Galvanized sheet is mainly used in air conditioning, refrigerator and other industries. For example, the rear panel of the indoor unit of the air conditioner, the rear panel of the cabinet, and the indoor chassis are all made of galvanized sheet. these places will encounter rain, sun, hot gas corrosion and other strong oxidation conditions. Therefore, galvanized sheet is often chosen in those working environments.


Galvanized sheet is mainly used in construction, household appliances, automobile and metallurgy industries. Among them, in the construction industry,it is mainly used for roof, doors and Windows, rolling curtain doors, ceiling keel and so on.;In the household appliances, it is used for refrigerators, washing machines and so on; In the automobile industry, it is mainly used for body shell, chassis, doors, fuel tank, fender and so on. ; In the metallurgical industry, it is mainly used for steel window billet, color coated plate substrate and so on.

Zinc layer is from 20g to 275g.The higher the zinc layer, the longer service life and greater corrosion resistance.

Coating definition:

1.Normal spangle coating. In the normal solidification process of zinc layer, zinc grains grow freely and form a layer with obvious zinc flower morphology .

2.Minimized spangle coating. In the solidification process of zinc layer, zinc grains are artificially limited and form a layer with as small zinc flower morphology as possible.

3.Spangle-free coating.By adjusting the chemical composition of the bath, the coating has uniform surface without visible zinc flower morphology.

4.Zinc-iron alloy coating. The whole coating zinc form a zinc and iron alloy layer after the heating treatment of the steel strip through the zinc bath. The appearance of the coating is dark gray without metallic luster.  It is easy to powder in the process of violent molding, so it is suitable for coating that can be directly painted without further treatment besides general cleaning.  

5.Differential coating. For both sides of galvanized steel sheet, different zinc layer weight coating is required.

6.Skin pass. Skin pass is a cold rolling processing of galvanized steel with a minimal amount of deformation for one or more of the following purposes:

Improve the surface appearance of galvanized steel plate to make it suitable for decorative coating; The finished product can not see the processing of the slip line (Luders line) or the phenomenon of folding temporarily reduced to minimum

欧美黑人成人www在线观看| 欧美福利一区| 色多多www视频在线观看免费| 69sex久久精品国产麻豆| 亚洲 日韩 激情 无码 中出| 国产精品午夜小视频观看| 国产免费一区二区三区免费视频| 尤物视频网站| 欧美老熟妇喷水| 狠狠色噜噜狠狠狠777米奇小说| 国产美女久久精品香蕉69| 内射爽无广熟女亚洲| 国产成人无码一区二区三区| 国内精品久久久久影院优| 精品国产一区二区三区久久久狼| 久久精品日日躁夜夜躁欧美| 精品人妻少妇嫩草av无码专区 | 亚洲精品乱码久久久久久| 久久久久久噜噜噜久久久精品 | 狂躁美女大bbbbbb视频u| 精品女同一区二区| 老汉色老汉首页a亚洲| 蜜桃网站入口在线进入| 久久精品国产清高在天天线| 狠狠久久亚洲欧美专区| 无码aⅴ在线观看| 中文字幕日韩在线观看| 欧美久久综合九色综合| 亚洲国产一区二区三区亚瑟| 免费女人18毛片A级毛片| 亚洲AV无码无在线观看红杏| 成人免费观看黄A大片| 国产AV一区二区三区| 青青草无码免费一二三区| 久久精品国产亚洲一区二区| 好男人日本社区www| 乌克兰少妇xxxx做受野外| 日本熟妇色xxxxx| 国产精品黄页免费高清在线观看 | 国产乱人伦真实精品视频| 一本大道无码AV天堂|